Outdoor line light brand according to the different needs of users to provide different styles

Outdoor line lights can provide different styles according to different needs of users, products are 12V,24V, etc., the length is 30CM,60CM,90CM,120CM, etc., in addition to these can also be customized for customers.

In general, the price of the outdoor line lamp brand is between 50 and 200 yuan, and the price is determined according to the level of power. Therefore, users need to carefully understand the size and power information they need when purchasing, and can ask the product information required by the business, so that you can avoid choosing the outdoor line light products that are not used.

1, look at the label on the lamp, the general regular outdoor line lamp manufacturers will attach a label to indicate the specific parameters of the product before the lamp factory, we can see the voltage used by the line lamp through the label is how many volts.

2. What to do without labels? There is no label on the lamp to indicate how much voltage is, if the lamp is transparent glue, you can clearly see the components inside the lamp body, you can judge by its lamp bead number, resistance, capacitance and other components, and then from low to high voltage to test the lighting of the lamp, during which some electrical measurement tools can be used to assist the test. If you cannot see the internal components of the lamp body clearly in the appearance, you need to disassemble the lamp for testing.

3, generally speaking, the lamp bead selected by the outdoor line lamp, the single voltage is about 1.8-3V, the general current will be controlled at 18mA-20mA, for different color temperature chip number, the voltage of each led lamp is not the same, and ultimately need to be tested by a special engineer or technician.

1, the packaging protection of outdoor line lights is not perfect, resulting in the impact of the lamp beads during transportation.

2, outdoor line light installation bending Angle is too large, resulting in led flexible light with solder joint and copper foil separation, resulting in not bright.

3. Excessive extrusion of the product during the installation of the outdoor line light leads to damage to the chip of the led flexible light strip or deformation of the solder joint.

4, the use of led chip body is not good, brightness decay faster.

5, outdoor line light circuit board welding layer is too thick, welding solder and circuit board can not be fully integrated together, is also a virtual welding phenomenon.

6, there are defects in the production process, led chip heat dissipation can not be well exported from the PIN foot, resulting in led chip temperature is too high to aggravate the chip attenuation.

7, led for constant current drive, some led using voltage drive reason led attenuation over.

8, outdoor line lamp solder quality is not good, led flexible lamp belt in the bending process of the solder joint is easy to produce brittle, falling off phenomenon.